Run Diags; System Reset; File Utilities - Kurzweil PC3LE6 Musician's Manual

Use the -/+ buttons, up and down cursor buttons or the Alpha Wheel to choose a file from the
file list displayed on the screen. The asterisk on the left side points to the file selected. If there are
subdirectories on the device, you can use the soft buttons labeled DOWN and UP to navigate
through them. When you've selected the file you want to install, press the soft button labeled
OK to perform the installation. Press the CANCEL soft button to return to the previous screen.
If you have updated an image but wish to return to the earlier version, you can use the
RESTORE OLDER feature in the UPDATE IMAGE menu. You will again be asked to choose the
image to restore. Note that only one version of the previously installed image is available to be
restored. If you've restored once, another restore will bring back the most recently updated
version.

Run Diags

This program runs specific hardware checks on PC3LE systems. Most of the time you won't
need to run the diagnostics, but if you're having some problems with the instrument it may be
helpful to perform these interactive tests when contacting Kurzweil support.
To exit the diagnostic program, press the EXIT button. You will return to the main Bootloader
menu.

System Reset

If you've made many complex updates to your objects and have saved a number of files off to
external storage, you might want to restore the instrument to its default state. This is especially
helpful if you're having problems getting sound programs or setups to work properly, or think
there may be some kind of underlying hardware problem. (Remember to first save your work
in the Storage menu. Once deleted, the files are completely removed from the PC3LE and
there is no way to retrieve them.) To clear all user objects and restore the factory default state,
press the soft button labeled System Reset on the Bootloader menu. The PC3LE will ask you to
confirm this action. Press OK to complete the clear function, or CANCEL to stop without
altering anything.

File Utilities

Use this menu to format the PC3LE's internal flash memory, which deletes all of the PC3LE's
internally stored objects and the OS. In rare cases Kurzweil support may instruct you to format
the internal flash if you are having issues that cannot be solved otherwise. It is possible (though
not likely) that the PC3LE file system can become corrupted due to hardware failure or power
outage during certain operations. This will result in the Bootloader being unable to bring up the
synthesizer system correctly. In such a circumstance, the Bootloader will take over control and
present its usual menu. If the file system is completely corrupted, it will not be possible to
reconfigure without first formatting the internal flash memory.
(If possible, remember to first save your work in the Storage menu. Once deleted, the files are
completely removed from the PC3LE and there is no way to retrieve them.) Press the soft
B--3