Kurzweil PC3LE6 Musician's Manual page 80

Setup Mode
The Setup Editor
Velocity
Use the Velocity field to select a MIDI attack velocity (0-127) for the note(s) designated in the
KeyNum field(s.) Alternatively, set the Velocity field to Auto and the note's velocity will change
each time it is triggered dependent on how hard the pad is hit each time.
MIDI Continuous Controller Destination or Program Parameter: Switch (SW (Momentary) or
SW (Toggled))
With Switch selected in the Type field, the selected pad will function just like the PC3LE's
assignable switches. See above, SW Pedal 1 & 2, Arp. switch, Arp. latch sw, Switch 1-
10 on page 7-13 for explanations of the parameters on this page. When a pad is being used as a
switch, the pad will light up red when the switch is on.
Riff
Set the Type to Riff to use the pad as a switch to start or stop the Riff for the current zone (if a
Riff is assigned for the current zone, see Riffs on page 7-51 to learn how.) When a pad is assigned
to play a Riff, the pad will light up blue when the riff is started.
Trig. Mode (Trigger Mode)
With Trig. Mode set to Start/Stop, the pad will act as a toggled switch, meaning it will alternate
between starting the Riff when pressed and released, and stopping the Riff the next time the pad
is pressed and released. With Trig. Mode set to One Shot, the riff will restart each time the pad is
pressed and released.
EntryState and ExitState
EntryState determines whether or not an initial setting for the Riff will be sent when the setup is
selected, and if so, what that initial setting will be. There are three choices: None (no setting is
sent when the setup is loaded), Off (the Riff is turned off when the setup is loaded), and On (the
Riff is turned on when the setup is loaded).
ExitState determines whether or not a setting for the Riff will be sent when you leave the setup
(either for another setup or for Program mode,) and if so, what that setting will be. There are
three choices: None (no setting is sent when you leave the setup), Off (the Riff is stopped when
you leave the setup), and On (the Riff is started when you leave the setup).
7-16