Chapter 11 Storage Mode; Storage Mode Page - Kurzweil PC3LE6 Musician's Manual

Chapter 11
Storage Mode
Storage mode lets you use a USB device (such as a thumb drive) to load, save, back up, and copy
files between the PC3LE and the outside world.
Storage mode in the PC3LE allows flexibility to organize files and their contents. Its features can
save you time by allowing you to select and organize files and directories.
Here's a summary of Storage mode functionality:
• USB Storage port
• USB Computer port
• FAT-32 file system compatibility
• Support for song files (sequences) in MIDI Type 0 and Type 1 format

Storage Mode Page

To enter Storage mode, press the Storage button, and the Storage mode page will appear:
In the center of the page you can select one of two storage destinations: USB device or USB PC
connection. These refer to a USB device which you can plug into the appropriate type of USB
port on the rear of the PC3LE (Using USB Devices below for details.) When you select USB PC
connection, any USB MIDI connection will be temporarily disconnected, and will not be
restored until you select USB device or exit Storage mode.
Use the cursor to select the destination that you wish to store your files to or load your files
from. The status of the selected destination will be displayed as either ready or you will see a
"No connection" message. The top right-hand corner of the page displays the currently selected
storage destination. If you are having trouble selecting a device that you have plugged in, try
exiting Storage mode and then entering Storage mode again.
The currently selected device will be read from or written to when you load, save, rename, or
delete files. Use the soft buttons to start any of these operations. Here is a brief description of
each of Storage mode's soft buttons:
Store Save objects or groups of objects as a .PLE file on the current device.
Storage Mode
Storage Mode Page
11-1