Kurzweil PC3LE6 Musician's Manual page 225

Part 3: Creating A New Split Setup From An Existing Split Setup
It is convenient to use an existing split setup as a template for a new split setup. This allows you
to easily create a new split setup by using the split point from an existing setup and using
different programs for each Zone. For example, let's use the setup 38 Jazz Bass/Piano, which
uses acoustic bass and acoustic piano programs, to create a split setup which uses electric bass
and electric piano programs:
1. If you are not already in Setup mode, press the Exit button until you reach the ProgramMode page,
then press the Setup mode button, located with the mode buttons to the left of the display. This
will bring you to the Setup mode main page.
2. Use the - / + buttons or Alpha Wheel to select the setup 38 Jazz Bass/Piano or use the
alphanumeric pad to enter 38 and press Enter.
3. With the setup 38 Jazz Bass/Piano selected, press the Edit button on the front panel. This will
bring you to the CH/PROG page of the setup editor.
4. Use the Chan/Zone buttons to the left of the display to select Zone 1. You can view the number of
the selected Zone in the top right corner of screen.
5. On the CH/PROG page for Zone 1, select the Program field. Select the program 105 P-Bass by
entering 105 and pressing the Enter button on the alphanumeric pad (see below.) You can also set
the desired program in the Program field by using the Alpha Wheel or - / + buttons.
6. Next, use the Chan/Zone buttons to the left of the display to select Zone 2.
7. On the CH/PROG page for Zone 2, select the Program field. Select the program 22 Sweet Loretta
EP by entering 22 and pressing the Enter button on the alphanumeric pad (see below.) You can
also set the desired program in the Program field by using the Alpha Wheel or - / + buttons.
Now the playing the lower half of the keyboard will produce electric bass, and playing the
upper half of the keyboard will produce electric piano. To finish, press the Exit button to the right
of the display to exit the Setup Editor and save your changes to this setup under a new ID#. See The Setup
Editor section at the beginning of this chapter for details on saving when you exit the Setup
Editor.
Tutorials: Setup Mode
Using And Editing A Split Program Setup
13-7