Real-Time Control Of Arpeggiator Parameters - Kurzweil PC3LE6 Musician's Manual

Real-time Control of Arpeggiator Parameters

You can have real-time control over several arpeggiator parameters, by assigning physical
controllers to special arpeggiator Controller Destinations. Any input (or entry value) from a
physical controller assigned to an arpeggiator Controller Destination overrides the programmed
values for the parameters of the arpeggiator on that controller's zone. The override remains in
effect until you select a different setup (or a different program in Program mode.) Remember,
each of the following Controller Destinations affects only the arpeggiator for the zone which
your controller is assigned to.
Controller
Number
147
148
150
151
152
153
154
155
156
157
158
159
160
170
Corresponding
ARPEGGIATOR
Parameter
ArpOn Any controller value turns the Arpeggiator On.
ArpOff Any controller value turns the Arpeggiator Off.
ArpOrder Arpeggiator Order, each range of values selects one of
nine options in order of the parameters list: 0-14
(Played,) 15-28 (Upwards, etc.,) 29-42, 43-56, 57-70,
71-84, 85-98, 99-112, 113-127 (Simultaneous.)
ArpBeats Arpeggiator Beats, each range of values selects one of
seven options in order of the parameters list: 0-18
(Quarter notes,) 19-36 (8th notes, etc.,) 37-54, 55-72,
73-90, 91-108, 109-127(32nd triplets.)
ArpShift The 88 Arpeggiator Shift steps are scaled over the 128
MIDI controller values, so that 0 = 0 steps and 127 = 88
steps.
ArpLimit The 60 Arpeggiator Shift Limit steps are scaled over the
128 MIDI controller values, so that 0 = 0 steps and 127 =
60 steps.
ArpLmtOp Arpeggiator Shift Limit Option, each range of values
selects one of seven options in order on parameters list:
0-18 (Stop,) 19-36 (Reset, etc.,) 37-54, 55-72, 73-90,
91-108, 109-127 (FloatBip.)
ArpVel Arpeggiator Velocity, each range of values selects one of
twenty-three options in order on parameters list: 0-5
First,) 6-10 (Played, etc.,) 11-15...101-105, 106-110,
111-127 (MissNotes9.)
ArpDur The Arpeggiator Duration % values are scaled over the
128 MIDI controller values, so that 0 = 1% and 127 =
100%.
Latch For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
Latch2 For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
ArpGliss Arpeggiator Gliss, 0-63 = off, 64-127 = on.
SusLatch For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 =
on.
-Arp Shift Sets ARPEGGIATOR values for Shift to negative. 0-63 =
off, 64-127 = on.
Setup Mode
The Setup Editor
Operation
7-47