Baymak Linyitomat Plus Instructions And Operating Manual page 34

Domestic solid fuel boilers
Table of Contents

Advertisement

The cover and control
panel cleaning to be
done at every 15 day
and/or and when it
required was done
Smoke pipes and
temperature
transition surface
cleaning to be done
once a week or
more.
Inner boiler cleaning
to be done daily and
when it required was
done. Ashes and coal
remnant to be taken
away.
• To cleaning of the combustion chamber in the boiler room, the smoke pipes
cleaning door(top door) should be opened and the turbulators taken out
holding from the tubes. After that pipes to be cleaned using brush and
brush cover, the dirt, coal remand and ash should be cleaned from flue gas
box side. After that all process should be repeated, cleaning lid and
turbulator should be assembled and the top door should be closed.
• Use some soft cleaning material in order to not cause a damage on the
boiler cover surface.
• Cleaning process of the warm surface and control panel should be made by
only Baymak authorized services.
63 9810.0293 - Rev.00 - 08/09/2008
34
Fully flue gas box cleaning
Komple davlumbaz
to be done beginning and
temizliği sezonbaşı
end of the winter season
ve sonunda ve/veya
and/or to be done if it
needs to be, depends on
yakıta bağlı olarak
the fuel type.
gerektiğince yapılır.
Flue gas box cleaning
necessary once a 15
days or and when it
required was done.
Cleaning door has to be
opened and all coal
residue to be taken
away.

Advertisement

Table of Contents
loading

Table of Contents