Table of Contents
Advertisement
• The fans which are given with the boilers as below:.
For the assembly of the fan and control panel, the cable channel&plate is used.
Please pay attention to door opening side when you connect the cables.
• Control panel assembly; All the sensors on the control panel should be
mounted correctly in the sensor beehives that are located backside of the
boiler.
63 9810.0293 - Rev.00 - 08/09/2008
1)The fan connection
bolts
2)The fan box gasket
MODEL
FAN CAPACITY
FLOW RATE - M3/H
LP 20
LP 40
LP 60
LP 80
1)Cable pass plate
2)Cable gland-fan power
supply connection cable
The door is opening from the left to right
on picture. So, the fan connection is
maked from the right cable pass plate.
In case of the door opening direction from
right to left side,the fan connection should
be maked from the left side cable pass
plate.
20
80
155
265
340
Advertisement
Table of Contents
