Technical Information; Calculating Method Of The Auxiliary Pump Flow Capacity For Lp 80 - Baymak Linyitomat Plus Instructions And Operating Manual

Domestic solid fuel boilers
Table of Contents

Advertisement

LINYITOMAT PLUS BOILER TECHNICAL INFORMATION
• Boiler flue gas temperature could be change between 180-300ºC Under
normal conditions. This value may be a little more at first burning. At the
minimum power, it is 130-180ºC according to room temperature.
Min.Boiler water
inlet temperature
Min. Boiler water
outlet temperature

Calculating method of the auxiliary pump flow capacity For LP 80

• In case circulation pump doesn't run, flame situation should be checked in
the boiler. Level of coal should be check if the coal level is enough for
increasing of the water temperature. In that case measure must be taken.
• Fuel loading mouth measurements
B
A
63 9810.0293 - Rev.00 - 08/09/2008
In case of
lignite coal
usage
o
50
C
o
C
o
60
C
o
C
At 80-60ºC operating
tempearature
Operating temparature range
Shunt pump
flow capacity
LĐNYĐTOMAT 20 PLUS
LĐNYĐTOMAT 40 PLUS
LĐNYĐTOMAT 60 PLUS
LĐNYĐTOMAT 80 PLUS
• For Linyitomat PLUS LP 20- 80
boiler
water
limited like shown at the table.
• It is mandatory that the boiler return
and out water temperature have to
be limits that are given at the table.
• If the return water temperature low
than at the table, an auxiliary pump
have to be used.
A(mm)
330
430
430
530
24
temperatures
was
B(mm)
203
210
220
250

Advertisement

Table of Contents
loading

Table of Contents