Alcatel SPEED TOUCH PRO User Manual page 75

3EC 17059 ABAA TCZZA Ed. 01
Field Description
HDLC In order to cope with these PPP frame differences, the STPro
adapts to the different formats on a 'per connection' base.
Framing
Additionally, the STPro offers the following PPP/AAL5 format
(continued)
configuration options via the CLI if interoperability problems
should arise:
Value
Never
Always
Keep
Note: This configuration possibility applies only to the upstream
direction ! In the downstream direction, the STPro will always
make sure that FF 03 is in front of the frame prior to put it in a
PPTP tunnel.
State The STPro allows multiple users to connect simultaneously via
several PPTP entries.
The 'State' column indicates the connection state of the PPTP entry.
It can take following values:
Value
Idle
In Use (IP)
8 Configuration and Use - PPP to PPTP Relaying
Description
The STPro will make sure that FF 03 will
never be found in front of a PPP frame
encapsulated on a AAL5/ATM
connection, independent of the actual
format of the PPP frame in the tunnel.
This setting is default, and follows
RFC2364.
The STPro will make sure that FF 03 is
always in front of a PPP frame
encapsulated on an AAL5/ATM
connection. Although not supported by
RFC2364, some equipment may rely on
this format.
The STPro will not change the PPP frame
arriving via a tunnel.
Description
The PPTP entry is configured, and ready
for use.
A user opened a session on this PPTP
entry.
The number in brackets is the IP address
of the PC currently using the PPPoA/PPTP
connection.
75 / 238