Alcatel SPEED TOUCH PRO User Manual page 143

Setting an IP address
via the 'Routing' page
3EC 17059 ABAA TCZZA Ed. 01
4. Click . As a result the new IP settings are applied:
5. To verify connectivity, point your Web browser to the new IP
address. Make sure though that your PC shares the same
subnet.
6. Click
storage.
Proceed as follows:
1. Click
the 'Routing' page (See section 17.2 for more information).
On this page the following 'IP Address' table can be found:
2. Enter the following information:
Select eth0 from the 'Intf' drop down list
D
Enter an IP address in the 'IP Address' field, e.g.
D
192.6.11.150
Enter an associated (sub)netmask in the 'Netmask' field,
D
e.g. 255.255.255.0
3. Click . As a result the new IP settings are applied.
4. To verify connectivity, point your Web browser to the new IP
address. Make sure though that your PC shares the same
subnet.
5. Click
storage.
to store the applied IP settings to permanent
in the left pane of the STPro pages to pop up
to store the applied IP settings to permanent
12 Networking Services - IP
143 / 238