2. Maximum floor temperature setting
Maximum floor temperature is preset at the factory to 35°C
for cable temperature safety.
Local building regulations must be observed
when changing the maximum preset tempera
ture.
You can/must set the maximum floor tempera
ture on the Devireg™ 532 by taking off the front
cover and with a screwdriver adjust the sunken
temperature dial in the top left hand corner
between 20° to 50°C.
Notice:
The floor temperature is measured where the floor sensor is
placed. The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top. Floor manufactures
often specify the max. temperature on the surface of the
floor.
Please contact your floor supplier for maximum surface
temperature.
4