Table of Contents
Advertisement
14
ELECTRICAL SYSTEM
14.7
Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and the engine.
Main work
–
Remove screws
B01332-10
–
Push latch
–
Remove the lamp cover
100746-10
. Remove the cover.
in the direction of the arrow.
.
205
Advertisement
Table of Contents
