Dc Fan Motor - Brother DX-2000 Service Manual

(5) Unfasten the four screws.
(6) Remove the Duplex PCB assy.
Taptites, cup S M3 x 5
3.7

DC Fan Motor

(1) Use a minus screwdriver to disengage the hook of the reversible gear 15-30, and
detach the gear.
(2) Detach the retaining ring E3.
(3) Remove the PF bearing 05.
(4) Remove the reversible gear assy.
Reversible gear 15-30
Hook Reversible gear 15-30
Duplex PCB assy
Figure 4.35
Reversible gear assy
Figure 4.36
IV-18
Taptites, cup S M3 x 5
DC fan motor
PF bearing 05
Retaining ring E3