Dc Fan Motor - Brother HL-2060 Service Manual

(2) Remove the Side cover R by releasing the 4 hooks.
Note: Before releasing the 4 hooks, remove the paper tray.
1.8

DC Fan Motor

(1) Remove the DC fan motor from the DC fan motor holder by loosening the 2
screws.
(2) Loosen the screws securing the Holder spacer and remove the entire DC fan
motor holder.
DC fan holder
Screws (yellow)
Holder spacer
<Front>
Figure 4.11
2 screws
Figure 4.12
IV-8
<Rear>
Side cover R
Hook at 4 places
DC fan motor