Brother DX-2000 Service Manual page 43

Table of Contents

Advertisement

NOTE FOR USING THIS PARTS REFERENCE LIST
1. In the case of ordering parts, it needs mentioning the following items:
(1) Code
(2) Q'ty
(3) Description
(4) Symbol ( PCB No., Revision , and Parts location mounted on the PCB.)
Note : No orders without Parts Code or Tool No. can be accepted.
< Example >
(1)
REF.NO.
CODE
Revision No.: marked on the printed circuit board.
B48K056 - 201A
2. Design-changed parts :
If the parts are changed, any one of the following symbols is indicated in the REMARKS
column.
#A : compatible between old and new
#B : replaceable from old to new
#D : incompatible
#
: newly established
3. The original of this list was made based on the information available in November, 1997.
4. Parts are subject to change in design without prior notice.
(2)
(3)
Q'TY
DESCRIPTION
(4)
SYMBOL
Design change indication
Specification No .
Pattern alteration No.
Circuit board No.
REMARK

Advertisement

Table of Contents
loading

Table of Contents