Carriage Guide 1; Duplex Pcb Assy - Brother DX-2000 Service Manual

3.5

Carriage Guide 1

(1) Slid the carriage guide 1 slightly in the direction of the arrow.
(2) Disengage the carriage guide 1 from the engaging locks of the inside frame assy.
(3) Slide up and remove the carriage guide 1.
Carriage guide 1
3.6

Duplex PCB Assy

(1) Disconnect the connectors of the solenoid, DC fan motor, reversible motor assy
and reverse sensor harness assy from the Duplex PCB assy.
(2) Detach the two retaining rings E3.
(3) Remove the two PF bearings 05.
(4) Remove the carriage roller assy.
Reversible motor assy
Retaining rings E3
PF bearing 05
Reverse sensor
harness assy
Engaging lock
Figure 4.33
Solenoid
Figure 4.34
IV-17
Engaging lock
DC fan motor
Carriage roller assy
Inside frame unit
Duplex PCB assy
PF bearing 05
Retaining ring E3