Paper Presser Motor - Brother DX-2000 Service Manual

(4) Remove the two retaining rings E3.
(5) Pull out the two paper pressing gear shafts.
(6) Remove the paper pressing gears 1 and 2.
Paper pressing gear 2
Gear release lever
Paper pressing gear shafts
2.6 Paper Pressure Motor
(1) Unfasten the screw A.
(2) Remove the cassette sensor lever and the leaf switch from the outside frame L
assy.
(3) Unfasten the two screws B.
(4) Remove the paper pressure motor from the outside frame L assy.
Outside frame L assy
Screw B (Taptite, bind S M3 x 5)
Cassette sensor lever
Screw A (Taptite, cup S M3 x 5)
Figure 4.25
Paper pressure motor
Leaf switch
Figure 4.26
IV-13
Paper pressing gear 1
Retaining rings E3
Screw B (Taptite, bind S M3 x 5)