Mounting The Outside Frame Unit In The Duplex Unit - Brother DX-2000 Service Manual

2.2.2

Mounting the outside frame unit in the Duplex unit

(1) Keeping the inside frame unit slantwise, mate the hole for the fulcrum shaft L of
the inside frame unit with the fulcrum shaft L.
Note1 : Do not get the relay harness assy caught between the inside
Note2 : If the solenoid assy harness is slack, stretch it.
(2) Turn the inside frame unit on the fulcrum shaft L to set it in the outside frame unit.
Inside frame unit
Hole for the fulcrum shaft L
Fulcrum shaft L
(3) Insert one end of the fulcrum spring in the hole in the outside frame unit.
Outside frame unit
Hole in the outside frame unit
frame unit and the outside frame unit.
Solenoid assy harness
Figure 4.17
Figure 4.18
IV-9
Outside frame unit
Relay harness assy
Inside frame unit
Fulcrum spring
Solenoid