Vehicle Cradle 24/72 Maximum VDC Input Cable Connection
Caution For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This
fused circuit requires a 5 Amp maximum time delay (slow blow) fuse. If the supply connection is made directly to
the battery, the fuse should be installed in the positive lead within 5 inches of the battery positive (+) terminal.
Recommended for vehicle electrical systems that use between 2 and 5 twelve volt batteries in series.
Vehicle Power Supply, 24 - 72 Maximum VDC (Fuse Not Shown)
1. Power Switch
2. Power On Indicator
3. Output to Vehicle Cradle
4. Input from Vehicle Battery
Honeywell Part Number: 9000A316PS24V72MX13 (Replaces 1300A301PS24WW).
3-11