Chapter 3: Powered Vehicle Mount Cradle
Overview
Vehicle mounted cradles and brackets are specifically designed for vehicle mount applications. The vehicle mounted assembly
restrains the MX3Plus and isolates it from shock and vibration.
Overhead, dash and roof support pillar mounting is via a RAM Mount accessory which includes all the hardware and squeeze
plates required for vehicle mounting.
In most cases, disconnect any power and peripheral cables from the MX3Plus before it is secured in the vehicle mounted
assembly.
Never put the MX3Plus into the vehicle mounted assembly until the assembly is securely fastened to the vehicle.
The MX3Plus must have a main battery installed when it is docked in a vehicle mounted cradle.
3-1