Installing The Starter Clutch; Installing The Generator - Yamaha 2006 FJR1300A Service Manual

A
B
L LLL L LLL L L LLL L
EAS24600

INSTALLING THE STARTER CLUTCH

1. Install:
• Starter clutch
• Starter clutch bolts "1"
Starter clutch bolt
32 Nm (3.2 m·kg, 23 ft·lb)
LOCTITE
NOTE:
While holding the generator rotor with the
sheave holder, tighten the starter clutch bolts.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
EAS24500

INSTALLING THE GENERATOR

1. Install:
• Woodruff key
• Generator rotor
• Washer
• Generator rotor bolt
NOTE:
• Clean the tapered portion of the crankshaft and
the generator rotor hub.
• When installing the generator rotor, make sure
the woodruff key is properly seated in the key-
way of the crankshaft.
GENERATOR AND STARTER CLUTCH
L LLL L L LLL L L LLL L
®
• Lubricate the generator rotor bolt threads and
washer mating surfaces with engine oil.
2. Tighten:
• Generator rotor bolt "1"
NOTE:
While holding the generator rotor "2" with the
LLL
sheave holder "3", tighten the generator rotor
bolt.
2
3. Apply:
• Sealant
(onto the stator coil assembly lead grommet)
4. Install:
• Generator cover gasket
• Generator cover
5-32
Generator rotor bolt
130 Nm (13.0 m·kg, 94 ft·lb)
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
1
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215
New
Generator cover bolt
12 Nm (1.2 m·kg, 8.7 ft·lb)
3
®
)