Installing The Front Cowling Right Inner Panel 2; Installing The Side Panels - Yamaha 2006 FJR1300A Service Manual

i. Insert the adjusting knob shaft into the hole in
inner panel 2, making sure to align the projec-
tion "a" on the shaft's sleeve with the slot "b"
in the panel, and then install the nut.
j. Install the headlight beam adjusting knob "4".
k. Install the hexagon socket bolts and the quick
fastener.
b
a
L LLL L LLL L L LLL L
ET3P61039
INSTALLING THE FRONT COWLING RIGHT
INNER PANEL 2
1. Install:
• Front cowling right inner panel 2
M MMM M MMM M M MMM M
a. Turn the handlebar completely to the right.
b. Install the adjusting knob shaft "1" onto the
right headlight beam adjusting cable "2".
c. Insert the adjusting knob shaft into the hole in
front cowling right inner panel 2 "3", making
sure to align the projection "a" on the shaft's
sleeve with the slot "b" in the panel, and then
install the nut.
d. Install the headlight beam adjusting knob "4".
b
a
4
1
LT
LT
LT
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
3
2
e. Fit the lower right corner of inner panel 2 into
the front cowling assembly, making sure to
align the bolt hole in the panel with the bolt
hole in the cowling.
f. Fit the top and side of inner panel 2 into the
front cowling assembly to the right of the
meter assembly, and then push the panel in-
ward, under the meter assembly.
4
LLL
g. Install the hexagon socket bolt and the quick
fastener.
MMM
L LLL L LLL L
ET3P61040

INSTALLING THE SIDE PANELS

1. Install:
• Side panels "1"
NOTE:
Be sure to fit each pin "a" on the side panels "1"
into the groove "b" in its corresponding hinge on
the side cowlings "2".
4-8
GENERAL CHASSIS
L LLL L L LLL L L LLL L L LLL L LLL