Yamaha 2006 FJR1300A Service Manual page 101

1. Auxiliary DC jack
2. Left radiator fan motor lead
3. Accessory box solenoid
4. Wire harness
5. Front cowling wire harness
6. Radiator inlet hose
7. Left radiator fan
8. Coolant reservoir breather hose
9. Left horn (low)
10. Left horn (low) leads
11. Thermostat assembly breather hose
12. Joint coupler
A. Fasten the handlebar switch leads to the front
cowling wire harness with a plastic locking tie.
Face the end of the plastic locking tie rearward,
along the side of the accessory box. Do not cut off
the excess end of the plastic locking tie.
B. Fasten the wire harness and left radiator fan motor
lead with the holder.
C. Fasten the front cowling wire harness to the
radiator inlet hose with a plastic locking tie, making
sure to install the tie on the harness' protective
sleeve, and then cut off the excess end of the tie.
2-52
CABLE ROUTING