Removing The Pickup Rotor; Installing The Pickup Rotor - Yamaha 2006 FJR1300A Service Manual

EAS24530

REMOVING THE PICKUP ROTOR

1. Remove:
• Pickup rotor bolt "1"
• Washer "2"
• Pickup rotor "3"
NOTE:
While holding the generator rotor "4" with the
sheave holder "5", loosen the pickup rotor bolt.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
EAS24540

INSTALLING THE PICKUP ROTOR

1. Install:
• Pickup rotor "1"
• Washer
• Pickup rotor bolt
NOTE:
When installing the pickup rotor, align the
groove "a" in the crankshaft sprocket with the
projection "b" in the pickup rotor.
NOTE:
1
2
5-35
2. Tighten:
• Pickup rotor bolt "1"
Pickup rotor bolt
45 Nm (4.5 m·kg, 32 ft·lb)
While holding the generator rotor "2" with the
sheave holder "3", tighten the pickup rotor bolt.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
2
3. Apply:
• Sealant
(onto the crankshaft position sensor lead
grommet)
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215
PICKUP ROTOR
1
3
®
)