Yamaha 2006 FJR1300A Service Manual page 438

2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM (1/2)"
on page 8-27 and "CIRCUIT DIA-
GRAM (2/2)" on page 8-29.
OK ↓
Replace the meter assembly.
The speedometer fails to operate.
1. Check the rear wheel sensor.
Refer to "MAINTENANCE OF THE
REAR WHEEL SENSOR AND
SENSOR ROTOR" on page 4-22.
OK ↓
2. Check the entire speed sensor wir-
ing.
Refer to NOTE.
OK ↓
Replace the ABS ECU, ECU or meter
assembly.
NOTE:
Repair or replace if there is an open or short circuit.
• Between rear wheel sensor and ABS ECU coupler.
(white–white)
(black–black)
• Between ABS ECU coupler and ECU coupler.
(white/yellow–white/yellow)
• Between ECU coupler and meter assembly.
(yellow/blue–yellow/blue)
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the rear wheel sensor.
NG →
Properly connect or repair the speed sen-
sor wiring.
8-35
SIGNALING SYSTEM