Yamaha 2006 FJR1300A Service Manual page 569

A
2
1
b. Measure the oil level switch resistance.
L LLL L LLL L L LLL L
EAS28220
CHECKING THE FUEL SENDER
1. Disconnect:
• Fuel pump coupler
• Fuel sender coupler
(from the wire harness)
2. Remove:
• Fuel tank
3. Remove:
• Fuel pump
(from the fuel tank)
4. Check:
• Fuel sender resistance
Out of specification → Replace the fuel pump
assembly.
Fuel sender
Sender unit resistance (full)
19.0–21.0 Ω
Sender unit resistance (empty)
139.0–141.0 Ω
M MMM M MMM M M MMM M
a. Connect the pocket tester (Ω × 10) to the fuel
sender terminals as shown.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
• Positive tester probe →
green/white "1"
• Negative tester probe →
black "2"
B
2
1
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
ELECTRICAL COMPONENTS
b. Move the fuel sender float to minimum "3"
and maximum "4" level position.
LLL
c. Measure the fuel sender resistance.
L LLL L LLL L
EAS28250
CHECKING THE RADIATOR FAN MOTORS
The following procedure applies to both of the
radiator fan motors.
1. Check:
• Radiator fan motor
Faulty/rough movement → Replace.
M MMM M MMM M
a. Disconnect the radiator fan motor coupler
from the wire harness.
MMM
b. Connect the battery (DC 12 V) as shown.
• Positive battery terminal →
blue "1"
• Negative battery terminal →
black "2"
c. Measure the radiator fan motor movement.
L LLL L LLL L
8-166
3
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L
L LLL L LLL
M MMM M MMM
L LLL L LLL