Putting Into Operation After Storage - KTM 250 SX-F PRADO 2020 Owner's Manual

19 STORAGE
19.2
128

Putting into operation after storage

401059-01
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Install the 12-V battery.
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing for
use. ( p. 27)
–
Take a test ride.
( p. 104)
p. 49)