６-７-８ Rs232C Port; ６-７-９ Alarm; ６-７-１０ Alarm Duration; ６-７-１１ Menu Time Out - Veilux SVR-1648D1 User Manual

６-７-８ RS232C Port
① Move to {Menu} {Setup} {System} {8. RS232C Port}.
② On the selection window, select the device by using the arrow keys and the Select button.
６-７-９ Alarm
Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning] through [Buzz-
er/ E-mail/ Relay01/ System check].
Select each [Off/Buzzer/E-mail/Relay01/Popup Window] by ticking.
６-７-１０ Alarm Duration
① It sets the duration of the alarm triggered by the recording and system event.
② Move to {Menu} {Setup} {System} {10. Alarm Duration}.
③ In the selection window, set Alarm Duration by using the arrow keys and the Select button.
６-７-１１ Menu Time Out
If no input is made in the System Setup menu from the front buttons, remote controller and mouse, the system
automatically shifts to the real-time monitoring mode.
① Move to {Menu} {Setup} {System} {11. Menu time Out}.
② In the selection window, select the time zone you want to set by using the arrow keys and the select button.
The Automatic Menu Exit is not used.
Off
※ The user can exit the menu by pressing the [ESC] button in the System
menu.
If there is no input from the front button, remote controller, or mouse, the
1/2/3 MIN
system will shift to the real-time monitoring mode.
The user can enter the time directly.
User Setting
※ The time can be set to 1 ~ 60 minutes.
③ Selecting the User Setting causes the input window to appear.
④ Enter the time by using the numeric buttons or the arrow keys and the Select button.
６-７-１２ Language
This feature is used to select the language for the On Screen Display (OSD) menu of the system. 17 languages
are supported.
※ Popup Window
Setup at {Menu} {Setup} {System} {9. Alarm}.
Popup Window is to pop up the system check window in the
monitoring screen as shown. it indicates [Video Signal loss/
HDD full/ FAN fail/ HDD fail/ HDD warning].
58