Table of Contents
Advertisement
Moving the camera, down, right, or left excessively may cause black or gray areas to appear on
the screen. The level at which such condition does not occur is the proper control range for the
camera.
５-４-３ Display Setting
Camera Title On/Off, Control Bar On/Off, Button Sound On/Off, Sequence Duration 1-10seconds and TV OUT
Adjustment are available. After selecting Display Setting, it becomes the 1 channel mode and a menu pops up as
shown below.
TV OUT Adjustment is to move the TV OUT screen Up/Down/Left/Right.
Moving the screen up, down, right, or left excessively may cause black or gray areas to appear on
the screen. The level at which such condition does not occur is the proper control range for the
monitor.
５-５ Control
In the real-time monitoring, move to {Menu} {Miscellaneous} {Control}.
[Figure 5-18. Screen Setup Window]
[Figure 5-19. Display Setting Window]
29
Advertisement
Table of Contents
