Table of Contents
Advertisement
② Move to {Menu} {Miscellaneous} {Control} {Spot} and configure on the Single mode, Quad
mode, Sequence and Channel.
③ Event Spot
Event Spot is to show a channel quickly that is set with the event function in case events (Sensor, Motion and
Audio) occur. The event check interval is one second. If events are detected in many channels, it shows a
channel with the last event. Move to {Menu} {Setup} {Action} {Alarm} {Spot}.
④ Sequence Spot
The user can select more than one channel in Manual Spot and have a sequential image through Spot. Move to
{Menu} {Miscellaneous} {Control} {Spot} {Sequence}.
５-３-４ Menu in Monitoring Mode
The user can control all functions available in Monitoring Mode in {Menu}.
① Press the Menu or right-click mouse button. The {Menu} will then appear.
② Select the desired item by using the arrow keys or mouse.
③ Press the ESC button or right-click mouse button to end the menu.
５-３-５ Zoom
Zoom is to zoom in or out the 1 channel division image in the real time monitoring mode.
① Move to {Menu} {Zoom} or press the zoom icon from the control bar in the real time monitoring
mode.
② After selecting a channel, it becomes the 1 channel mode and the zoom control screen shows at bottom-
right.
[Figure 5-12 . Spot]
[Figure 5-13. Zoom Control Screen]
26
Advertisement
Table of Contents
