２-３ Connection Of Other Devices - Veilux SVR-1648D1 User Manual

２-３ Connection of Other Devices
D1 series has differences in feature as described below. Be cautious.
Item
Internal HDD
Bay
Spot
Item
Audio
Sensor
Relay
POS
Connect the PTZ controller cable, audio input/output, network, and sensors as shown below.
Connecting Device
1
SPOT Monitor(CCTV Monitor)
2 Mike / Speaker
3
LAN Cable
4 PTZ Camera
5 Sensor / Relay / POS
6 Keyboard controller
1) SPOT Monitor
Connect Spot Monitor to the rear SPOT terminal.
SVR-1648D1 supports 4ea SPOT terminals and
2) Audio Input/Output
SVR-1648D1 supports 16 audio inputs and 1 output
3) Terminal Block
[Figure 2-3 . SVR-1648D1 series Terminal Block and Description]
The terminal blocks in the rear of the product are for the connection of PTZ / Sensor / Relay / POS Connection.
The number of the terminal block may be different depending on the model.
① PTZ Camera/Keyboard Controller
Connect PTZ control cable; TRX+, TRX- and GND to Terminal Block(TB1);No.4 TRXD+, No.5 TRXD- and No.10
GND in the rear of DVR. You may refer to APPENDIX for supported PTZ cameras in this manual. Keyboard con-
troller has the same connection as PTZ camera.
SVR-1648D1
6 SATA
4/1 BNC - Single or Quad
SVR-1648D1
16
16
4
8
Rear Panel SPOT
Rear Panel Audio Input / Audio Output
Rear Panel Ethernet
Rear Panel Terminal Block
Rear Panel Terminal Block
Rear Panel Terminal Block
DVR Terminal
13