Table of Contents
Advertisement
６-７ System
1. DVR Name
2. ID For Remote Controller
3. ID For Key Controller
4. User Registration
5. Admin. Password
6. Upgrade
7. Factory Setup
8. RS232C Port
9. Alarm
10. Alarm Duration
11. Menu Time Out
12. Language
６-７-１DVR Name
. The initial value is the Mac address. (It supports up to 20 letters for the system name.)
６-７-２ ID for Remote Controller
When multiple devices are used, set the remote controller ID to identify input signals from the remote controller.
Only the system that DVR ID and remote controller ID match can receive input signals from
the remote controller as shown below.
[Figure 6-47. System Setup Window]
Used to name the DVR device.
Used to name the remote controller for running the system.
Unique system controller number setting.
Used to register, add, or delete users.
Used to set the password of the Local System Administrator.
Upgrades the system firmware/system setup
Initialize Setup.(Factory default value, except for the network
value)
Use of the RS232C port.
Set the alarm On/Off and alarm format.
Set the alarm time by continuous/5/10/15/User setting
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen.
System OSD language setting
)
55
Advertisement
Table of Contents
