1. Manuals
  2. Brands
  3. Veilux Manuals
  4. DVR
  5. SVR-1648D1
  6. User manual

Veilux SVR-1648D1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
The Art of Surveillance
SVR-1648D1

USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Veilux SVR-1648D1

Summary of Contents for Veilux SVR-1648D1

  • Page 1: User Manual

    ® The Art of Surveillance SVR-1648D1 USER MANUAL...
  • Page 2 SVR-1648D1 FCC Compliance Statement Model Name: SVR-1648D1 This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conductions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.
  • Page 3 1 Replace lithium batteries as instructed to avoid danger. 2 Dispose used lithium batteries properly. 【Warning and Caution are indicated as follows.】 Possible injury or product damage. Risk of minor injury or product damage. Cautions for the usage of the product. Information for the usage of the product.

  • Page 4: Table Of Contents

    １-２ Components ..................8 １-３ SVR-1648D1 Product Introduction ............9 Chapter ２. Installation and connection ........... 10 ２-１ SVR-1648D1 Names and Features of Each Part ........10 ２-１-３ SVR-1648D1 Rear Panel ................10 ２-２ Installation and Connection ..............11 ２-２-１ Basic Connection ..................12 ２-３...
  • Page 5 ５-６ Search ....................30 ５-６-１ Search Mode .................... 30 ５-６-２ Playback Menu ..................30 ５-７ Calendar Search ................. 31 ５-７-１ Search Mode .................... 31 ５-７-２ Year/Month/Day Selection ................31 ５-７-３ Time Index ....................31 ５-７-４ Event ...................... 31 ５-７-５ Multi-Channel Search ................. 31 ５-７-６...
  • Page 6 ６-３-４ Alarm ...................... 48 ６-３-５ Duration ....................48 ６-３-６ Log ......................48 ６-３-７ Advanced ....................48 ６-４ Schedule ................... 48 ６-４-１ Schedule Setup..................49 ６-５ Storage ..................... 49 ６-５-１ Max. Recording Days ................. 49 ６-５-２ HDD Overwrite..................49 ６-５-３ Local Storage Management ................. 50 ６-６...

  • Page 7: Chapter １. Introduction

    [Figure 2-2. SVR-1648D1 Basic Connection and Device Connection] ......... 12 [Figure 4-5. Menu Window] ....................20 [Figure 5-7. Recording Status Window] ................... 22 [Figure 5-8. Login Window] ....................23 [Figure 5-9. Big / Biggest Channel Mode] ................24 [Figure 5-10. SVR-1648D1 Channel Mode] ................24 [Figure 5-12.

  • Page 8: １-２ Components

    SVR-1648D1 System Reliable Standalone DVR Format 16Ch – D1 480/400 Embedded Linux - Built in Flash Memory Video Input 6 BNC Monitor 1 BNC, 1 VGA, 1 HDMI Video Loop 16 BNC Output Spot 4 BNC - Single or Quad...

  • Page 9: １-３ Svr-1648D1 Product Introduction

    １-３ SVR-1648D1 Product Introduction D1(4CIF) real-time recording 16Ch audio recording 4Ch spot output (SVR-1648D1) Various video output port (HDMI, VGA, BNC) Various video output mode (Full HD, WSXGA+, SXGA, SDTV) 6 HDD bay Jog-shuttle 8Ch POS/ATM interface Pre-alarm recording Watermarking & watermarking detection Auto e-mailing notification max.

  • Page 10: Chapter ２. Installation And Connection

    Chapter ２ . Installation and connection ２-１ SVR-1648D1 Names and Features of Each Part ２-１-３ SVR-1648D1 Rear Panel...

  • Page 11: ２-２Installation And Connection

    Video Camera Connection LOOP OUT Video Signal loop-back Output Connection AUDIO IN Audio Input Connection Power Supply VENTILATING (D1-series) OPENING AC Inlet POWER 90 ~ 250V, 59/60Hz, 80 Watts ２-２Installation and Connection [Figure 2-2. SVR-1648D1 Basic Connection and Device Connection]...

  • Page 12: ２-２-１ Basic Connection

    ２-２-１ Basic Connection ※ By referring to above [Figure 2-1] ~ [Figure 2-2], make a connection accordingly. Connection Connection Device DVR Terminal Order CCTV Camera Rear Panel Video IN CONFIG SWITCH Setup Rear Panel Left 4ea Switch (Refer to below; CONFIG SWITCH Setup) CCTV Monitor Rear Panel TV VGA Monitor / LCD Monitor...

  • Page 13: ２-３ Connection Of Other Devices

    SVR-1648D1 supports 16 audio inputs and 1 output 3) Terminal Block [Figure 2-3 . SVR-1648D1 series Terminal Block and Description] The terminal blocks in the rear of the product are for the connection of PTZ / Sensor / Relay / POS Connection.
  • Page 14 PTZ Camera may not be working properly if GND is not connected. ② Sensor/Relay /POS Connect Sensor/Relay/POS to the terminal block directly depending on the model. Sensor and Relay Type NC(Normal Close) : Normally closed; opens when a signal is received NO(Normal Open) : Normally open;...

  • Page 15: Chapter ３. Operation And Setup Tools

    Chapter ３ . Operation and Setup Tools SVR-1648D1 can be controlled easily by using the front panel buttons, front panel, jog/shuttle, remote controller and mouse. ３-１ SVR-1648D1 Front Panel Button Name Function Logo Veilux LED DISPLAY HDD and System Power and Status Indication LED...

  • Page 16: ３-２ Svr-1648D1 Remote Controller

    ３-２ D1 series Remote Controller A) Basic Control Button Turn the system power POWER ON or OFF. Record all channels or stops recording RECORD all channels. NUMBER Input of numeric data. Set up the remote controller ID. B) System Operation and Setup Button MENU Data, Schedule, System Set up Exit the current menu...

  • Page 17: ３-３ Mouse

    Example) When the remote controller ID is set to 1 Press the {ID} button, enter {0} and {1}, and press the {ID} button again. To control all DVRs with the different ID, set the remote controller ID to 999. ３-３ Mouse The mouse pointer as shown below appears if a mouse is connected to the USB terminal at the front panel.

  • Page 18: Chapter ４. Dvr Operation Setup

    Chapter ４ . DVR Operation Setup ４-１ SVR-1648D1 Storage Installation ※ The recommended HDD specification are shown below Type Size Capacity Buffer SATA I, II 3.5“ 1, 2 Flat Up to 1.5TB over 8MB over 7200 Step 1 ※ 1) Using a screw driver, unscrew and take off the top case of the prod- uct.
  • Page 19 6) By reversing Step 2, combine both top② and bottom① HDD bay with the body. ※ Step 4 7) Connect the power cable and data cable to HDD. ※ SVR-1648D1 model has a different type of SATA power cable. 9) Connect the HDD data cable into the mainboard data cable connector(④).

  • Page 20: ４-２Power On

    Example> {Menu} {Setup} : go to Setup that is a sub-provision of Menu. ４-２Power ON. ① SVR-1648D1(90 ~ 250V, 50/60Hz) ) and connect the power. ② Booting will be initiated by pressing the power button in the front panel. ③ After booting is finished, the live screen and channel indication / clock are shown.

  • Page 21: ４-６ Date/Time Setup

    The initial recording setup is [Recording Resolution: CIF] [Recording Quality: High] [Record- ing Mode: Continuous]. An image of the connected cameras is recorded with above setting. For more detail, check [6-3 Action]. ４-６ Date/Time Setup ① Select {Menu} {Setup} {Time}. ②...

  • Page 22: Chapter ５. System Operation

    Chapter ５ . System Operation ５-１ Real Time Monitoring Mode and Icon After booting is finished, Audio/Recording Status/Channel Title/Connection Status/Time/HDD Status are displayed as shown below. [Figure 5-7. Recording Status Window] ※ Recording Event / Recording Mode Icon ※ Motion Detection Recording Sensor Recording Recording Audio Recording...

  • Page 23: ５-２ System Login

    ※ Control Bar ※ ① DVR ID Full Screen ② 4 Channel Screen ③ 8 Channel Screen ④ 16 Channel Screen ⑤ ZOOM function ⑥ Auto Sequence Mode ⑦ Date / Time ⑧ HDD Status ⑨ Playback ⑩ ５-２ System Login ５-２-１...

  • Page 24: ５-２-３ Logout

    After logging out, the user cannot use {Menu}. ① On the real-time monitoring screen, select {Menu} {Logout}. ５-３ Monitoring SVR-1648D1 features powerful monitoring functions as shown below. 1 / 4 / 9 / Big / 16 / Biggest Division Mode and Auto Sequence Mode Channel Grouping...

  • Page 25: ５-３-２ Channel Grouping

    Spot is to output a channel that is set with a certain function and Spot has an independent monitor and output. The priority for Spot is Manual Spot > Event Spot > Sequence Spot. ① Manual Spot The user can designate a spot channel manually. SVR-1648D1 supports 4ea Spot channels...

  • Page 26: ５-３-４ Menu In Monitoring Mode

    [Figure 5-12 . Spot] ② Move to {Menu} {Miscellaneous} {Control} {Spot} and configure on the Single mode, Quad mode, Sequence and Channel. ③ Event Spot Event Spot is to show a channel quickly that is set with the event function in case events (Sensor, Motion and Audio) occur.

  • Page 27: ５-３-６ Screen Control By Using Ptz

    ※ Duration can be selected at 5/10/15/20/5-60(User setting) seconds. ※ Tour consists of Tour 1/ Tour 2 and each tour can be set with 8 Preset. ※ SVR-1648D1 supports 21 protocols for PTZ control. For supported protocols, refer to APPENDIX.

  • Page 28: ５-４ System Information And Screen Setup Change

    [Figure 5-16. PTZ Control Min./Max.] In the PTZ mode, there are two function; Max. and Min. Speed can be set between 1-100. Tour has [Tour1] and [Tour2]. Preset can be set 1 to 8. Home Position Time is 1/5/10/User setting(1-60) minutes.

  • Page 29: ５-４-３ Display Setting

    [Figure 5-18. Screen Setup Window] Moving the camera, down, right, or left excessively may cause black or gray areas to appear on the screen. The level at which such condition does not occur is the proper control range for the camera.

  • Page 30: ５-６Search

    ② Move to the Relay tab and select. SVR-1648D1 model supports 4 channel input ③ Move to the TEXT tab and select. SVR-1648D1 model supports 1-16 channel text input ５-６Search ５-６-１ Search Mode Move to {Menu} {Search} in the real-time monitoring mode.

  • Page 31: ５-７ Calendar Search

    (4) Go to The Last Played Time The user can playback from the last played time by Multi-Channel Mode. ※ Go To The First and Go To The Last are only available in {Multi-Channel}. ５-７ Calendar Search On the real-time monitoring screen, select ５-７-１...

  • Page 32: ５-７-６ Multi-Time Search

    ③ Move the time line to a specific time point by using the arrow keys or the numeric buttons and press the Search button. ④ Selecting the time leads to the recorded video display of each channel in the minute bar graph. ⑤...

  • Page 33: ５-８-１Playback And Playback Speed Control

    Select {Menu} {Search} {The Last Played Time}. Playback in the Log View After selecting {Menu} {Miscellaneous} {Log Viewer}, select or double-click the time line listed to play. ※ SVR-1648D1 provides a variety of the playback. Smart Search PCD Search Calendar Search...

  • Page 34: ５-８-２ Smart Search

    Selecting the right-mouse button or menu button in the Playback Mode pops up the {Playback Menu} as shown below. [Figure 5-27. Playback Menu] ５-８-２ Smart Search This function is used to search an image with the object movement at a specific zone quickly. Searching by each channel and a detail control are available.

  • Page 35: ５-８-３ Pcd Search

    [Figure 5-29. Smart Search Motion Detection Window] ⑤ It may take time during the searching. Start the playback after searching. ５-８-３ PCD Search ① This is to detect appearance or disappearance of the object at the pattern change detection area. ②...

  • Page 36: ５-８-９ Event

    ５-８-９ Event Event is to search and play events[ All/Motion/Sensor/Audio ]. ５-８-１０ Audio Select a desired audio channel to be played. ５-８-１１ Backup The user can save the backup image data and capture the image into [CD/External Device]. Backup Save the recorded data into [CD/External Device]. Snapshot Capture and save the current displaying screen.

  • Page 37: ５-９-２ System Log Viewer

    ５-９-２ System Log Viewer ① In the real-time monitoring mode, {Menu} {Miscellaneous} {Log Viewer}, then, Log List Window pops up. ② On the activated calendar window, select the desired date (year/month/day) by using the arrow keys and the Select button. ③...

  • Page 38: ５-１０-３ Recording Status View

    ５-１０-３ Recording Status View (1) Recording Status by Color ※ Recording Event / Recording Mode Icon ※ Motion Detection Recording Sensor Recording Recording Audio Recording Event Pattern Change Recording Text Recording Video Recording Recording Audio Recording Mode Text Recording (2)Starting and Stopping Record All In the real-time monitoring mode, the user can start or stop the recording of all channels by selecting {Menu} {Miscellaneous} {Record On/Off}.

  • Page 39: ５-１１-３ Backup In Log Mode

    ５-１１-３ Backup in Log Mode ① Select a date in {Menu} {Miscellaneous} {Log Viewer} and select a log related to the data to be backed up. ② Click the right-mouse button or select {MENU} button in the front panel. ③ The automatic backup time is set to 5 minutes before the selected log is generated, and the end time, to the time the selected log is generated.

  • Page 40: ５-１２ Setup Backup

    ① [Figure 5-34] shows the initial backup window menus. ② A list of the devices that can be selected is outputted with simple information of the currently selected devices ③ Selecting a device by pressing the Select button causes the free space and total capacity for the selected device to be displayed.

  • Page 41: ５-１３ Log Backup

    Saved as the name below. ①Model ② DVR name ③ Version ④ Date ⑤ Time ③ Move to {Menu} {Setup} {System} {6. Upgrade} ->{Setup} after insert the backup device. ④ With this way, the user can upgrade a new device with the current setup values in easy way. Log Backup ５-１３...

  • Page 42: ５-１６Snapshot

    ５-１６Snapshot The Snapshot function lets the user create a JPG file in the real-time monitoring, playback, search, or log mode and back up the image data. ① To back up the currently displayed image, select {Menu} {Backup} {Snapshot} in the real-time monitoring, Playback and Log mode.

  • Page 43: Chapter ６. Setup

    Chapter ６ . Setup ６-１Time ※ Function Description 1. Time Synchronization 1) Synchronization with the NTP server The time is synchronized once every hour with the NTP Server. A. Automatic Setup The nearest server from the user’s zone will be selected for connection. If the connection fails, the next near- est server will be chosen.

  • Page 44: ６-１-２ Date And Time

    ６-１-２ Date and Time (1)Date and Time Only available when Time Server is off. The system date and time format is Year/Month/Day Hour/Minute/Second. ① By using the arrow keys and the Select button, move the focus onto the desired field; Year/Month/Day Hour/Minute/Second and press the Select button.

  • Page 45: ６-２ Definition

    ６-２ Definition ６-２-１ Camera ① Connection [Figure 5-39. Setup / Definition Menu] Used to set whether to connect or disconnect each camera channel. ※ When the camera channel is set to disconnected, the video contents will not be displayed even if the camera is actually connected. ②...

  • Page 46: ６-２-４ Relay

    [Figure 5-40. Motion Area Setup] ① Select Motion Area of each channel. ② It becomes the 1 channel division mode and rectangular boxes appear where motions occur. Drag the yellow pixel cursor by using the mouse or the front button/remote controller and select pixels where motion detection doesn’t applied.

  • Page 47: ６-３-１ Schedule Selection (Schedule1 ~ Schedule4)

    Set the recording frame rate for Motion, Sensor and Audio, Pattern, Text Maximum Recording Frame by Resolution Resolution 2CIF 4CIF Model (NTSC/PAL) (NTSC/PAL) (NTSC/PAL) SVR-1648D1 480/400fps 480/400fps 480/400fps (4)Audio Used to set the recording of the external audio input linked to the system.

  • Page 48: ６-３-４ Alarm

    CBR and VBR can be set in 5 levels depending on recording quality. ６-４Schedule SVR-1648D1 provide 4 different recording mode configurations. Each schedule mode can be set one week/24 hours and the recording follows the setting automatically. [Figure 6-43. Schedule Window]...

  • Page 49: ６-４-１ Schedule Setup

    ６-４-１ Schedule Setup Select one schedule among Schedule 1 , Schedule2, Schedule3 and Schedule4. (1) Selection Tip ① Select the day and time to be set by using the arrow keys. ② Select after moving the cursor onto Time(0-23) or Day(Sun. – Holiday) then the user can configure the whole line at once.

  • Page 50: ６-５-３ Local Storage Management

    ６-５-３ Local Storage Management (1) Local Storage Management Function Local Storage refers to the internal hard disk and storages connected to the system via USB. Local Storage is classified and managed as {New}, {Direct} and {Backup}, and functions are described below. ①...
  • Page 51 1. Fault State : The storage device is completely damaged, and none of the S/W operations can be performed. The fault state is not related to a DVR problem. The DVR has detected the fault and stopped the recording. 2. Warning State : The storage device has a physical error that can be corrected by the storage device or by the DVR.

  • Page 52: Figure 6-45. Storage Format Procedure]

    (4)HDD Format for Direct Select the model first. As shown below, proceed with the following order {Offline} {Format} {Online}. [Figure 6-45. Storage Format Procedure] It may take some time during formatting. After formatting, select the model again and set as Online...

  • Page 53: ６-６Network

    ６-６Network [Figure 6-46. Setup Network Window] ６-６-１Ethernet (1) TCP/IP This is to use a fixed IP in the Local Area Network environment. ① Select {Ethernet} in {Menu} {Setup} {Network}. ② Select {TCP/IP}. ③ Save after filling in IP Address, Subnet Mask, Default Gateway, Primary DNS, and Alternative DNS. (2) ADSL This feature is used in the user authentication-type ADSL communication environment.

  • Page 54: ６-６-３Port

    ※ Access to DynDDNS sever(http://www.dyndns.org) and apply for the user account then, regis- ter the domain name to use and enter URL. ※ For more information, please access to the site. ６-６-３Port Move to {Menu} {Setup} {Network} {Port}. This feature is used to set the network port. The default value is between 2000 and 2007;...

  • Page 55: ６-７ System

    ６-７ System [Figure 6-47. System Setup Window] 1. DVR Name Used to name the DVR device. 2. ID For Remote Controller Used to name the remote controller for running the system. 3. ID For Key Controller Unique system controller number setting. 4.

  • Page 56: ６-７-３ Id For Keyboard Controller

    ① Move to {Menu} {Setup} {System} {2. Remote Controller ID}. ② In the selection window, enter ID by using the arrow keys and the Select button (the number 0~99 is available for ID.) If you forget the DVR ID, set the remote controller ID to 999 to start the DVR. Note, however, that the DVR ID should be the same as the remote controller ID.

  • Page 57: ６-７-７ Factory Default

    1) After copying the upgrade file, be advised to get rid of the USB device with safety removal mode from PC. 2) If the USB device is disconnected from the USB port while the upgrade file is being copied, the DVR system may not automatically detect the file. Removing USB during the upgrade in progress may cause damage on the system.

  • Page 58: ６-７-８ Rs232C Port

    ６-７-８ RS232C Port ① Move to {Menu} {Setup} {System} {8. RS232C Port}. ② On the selection window, select the device by using the arrow keys and the Select button. ６-７-９ Alarm Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning] through [Buzz- er/ E-mail/ Relay01/ System check].

  • Page 59: Appendix

    APPENDIX A/P/P/E/N/D/I/X (1) Recommended HDD Specification Type Size Capacity Buffer SATA I, II 3.5“ 1, 2 Flat Up to 1.5TB over 8MB over 7200 (2) Recommended PTZ Camera Protocol Vendor Model Protocol ULTRA_7 A.D. SENSORMATIC ULTRA_8 CHOU COHU3925 COHU DRX-500 Dongyang Dongyang DY-255...
  • Page 60 ® The Art of Surveillance...

Table of Contents