６-３-１ Schedule Selection (Schedule1 ~ Schedule4); ６-３-２ Event; ６-３-３ Recording - Veilux SVR-1648D1 User Manual

６-３-１ Schedule Selection (Schedule1 ~ Schedule4)
① Each channel can be scheduled in 4 different schedules. This schedule can be set as the recording
schedule and each time can be 4 different schedules.
６-３-２ Event
This is to set the events On/Off of Motion / Sensor / Audio / Pattern / TEXT.
Recording
Type
Continuous Continuous recording based on the Normal Speed frame rate.
Motion When motion is detected, recording will be initiated based on the event frame rate.
When input signal from an external sensor is generated, recording will be initiated based on
Sensor
the event frame value.
Audio When audio is detected, recording will be initiated based on the event frame value.
When there is a pattern change in the screen, recording will be initiated based on the event
Pattern
frame value.
When a text is received from POS device, recording will be initiated based on the event frame
Text
value.
６-３-３ Recording
(1) Recording Resolution
Used to set the resolution of the recorded channel.
Type
Resolution
CIF
2CIF
4CIF
(2)Recording Quality
Used to set the quality of the recorded video. Select among five levels {Lowest} / {Low} / {Middle} / {High} /
{Highest}.
(3)Frame Rate
If the user configures Normal Speed and Event Speed at the same time, the continuous recording follows Normal
Speed frame rate and the event recording follows Event Speed frame rate.
Normal Speed
Event Speed
Resolution
Model
SVR-1648D1
(4)Audio
Used to set the recording of the external audio input linked to the system.
Resolution by Video Type
NTSC
352ⅹ240
704ⅹ240
704ⅹ480
※ The higher picture quality, the bigger file size.
Set the recording frame rate for Continuous recording.
Set the recording frame rate for Motion, Sensor and Audio, Pattern, Text
Maximum Recording Frame by Resolution
CIF
(NTSC/PAL)
480/400fps
Description
PAL
352ⅹ288
704ⅹ288
704ⅹ576
2CIF
(NTSC/PAL)
480/400fps
4CIF
(NTSC/PAL)
480/400fps
47