Table of Contents
Advertisement
Chapter ４ . DVR Operation Setup
４-１ SVR-1648D1 Storage Installation
※ The recommended HDD specification are shown below
Type
SATA I, II
Size
Capacity
3.5" 1, 2 Flat
Up to 1.5TB
Step 1
※
1) Using a screw driver, unscrew and take off the top case of the prod-
uct.
1) Normal termination of the system and fully unplugged power
code are required before conducting HDD installation.
2) After installing HDD, Do not connect to power supply with the
top case opened. The top case must be covered before usage.
Step 2
※
2) Using a screw driver, unscrew the fixing bolt of the top HDD bay ②
and separate the top HDD bay② from the body.
3) Using a screw driver, unscrew the fixing bolt of the bottom HDD
bay① and separate the bottom HDD bay① from the body.
Buffer
RPM
over 8MB
over 7200
18
Advertisement
Table of Contents
