Table of Contents
Advertisement
６-２ Definition
６-２-１ Camera
① Connection
Used to set whether to connect or disconnect each camera channel.
※ When the camera channel is set to disconnected, the video contents will not be
displayed even if the camera is actually connected.
② Title
Name each camera. Max. 20 letters are available.
③ Covert
Used to hide the video channel on the real-time monitoring screen.
※ Video data are being saved on the real-time monitoring screen even though they
are displayed in black.
④ PZ Mask
Used to hide a certain area of the real-time monitoring screen. After selecting PZ Mask over each channel, it
becomes the 1 channel division mode and designate sections where you don't want to monitor.
⑤ Adjust
Adjust Brightness/Contrast/Color/Saturation/Sharpen/Camera.
６-２-２ POS
Setup the protocol and baud rate of the POS device.
６-２-３ Event Source
Select {Menu} {Setup} {Definition} {Event Source}.
(5) Motion Area
The user can setup the motion detection area. Area setup related to motion and PCD can be decided.
[Figure 5-39. Setup / Definition Menu]
45
Advertisement
Table of Contents
