Table of Contents
Advertisement
※ The user can view an image on full screen by double-clicking a desired channel in the 4/9/16 Sub-Screen
mode. Double-click any part of the screen to return to the previous mode.
※ Special Mode;
Big / Biggest, Channel Switching
- Front Button and Remote Controller : Press a numeric button to be moved to big/biggest screen.
- Mouse : Double-click on a channel to be moved to big/biggest screen.
※ Auto Sequence
Auto Sequence is to rotate images at an interval of the certain time in 1/4/9 Basic Division and Big/Biggest
Special Mode. Auto Sequence is not available in the Basic 16 Division mode.
① Move to {Menu} {Miscellaneous} {Display Setup } and select a duration time(1-10 seconds).
② Pressing Front {SELECT} Button / Remote Controller {SELECT} Button / Mouse Arrow Button initiate the
Auto Sequence mode.
③ Auto Sequence in Basic 1 / 4 / 9 Division Mode
1 Channel Mode Sequence
④ Auto Sequence in Special Big Division Mode (same application in Biggest Mode)
(It is only avaiabel when mutilple cameras are connected.)
５-３-２ Channel Grouping
Channel Grouping is to switch the image location in the screen between channels in the monitoring mode.
① On the real-time monitoring screen, select {Menu} {Miscellaneous} {Channel Grouping}.
② Select a channel to be switched after moving a yellow-focused selection window.
③ Select a channel to be switched when the window shows.
④ The Image location of the each channel is changed.
※ Grouping is not supported for the 1 Channel Division mode.
※ The user can drag the focused channel and drop on the desired channel to switch the loca-
tion by using a mouse. Also dragging the unfocused channel and dropping on the focused chan-
nel is available.
※ Changing the screen division mode causes other division modes to be changed as well.
※ This is only available in the Basic 1/4/9/16 Division mode and not available in the Special
Big/Biggest Division mode.
５-３-３ Spot
Spot is to output a channel that is set with a certain function and Spot has an independent monitor and output.
The priority for Spot is Manual Spot > Event Spot > Sequence Spot.
① Manual Spot
The user can designate a spot channel manually.
SVR-1648D1 supports 4ea Spot channels
4 Channel Mode Sequence
.
9 Channel Mode Sequence
25
Advertisement
Table of Contents
