Table of Contents
Advertisement
６-３-４ Alarm
※ This function is used to generate alarms through the PTZ Preset/e-mail/spot 1/Popup/Callback in case of an
event. PTZ preset can be configured between 1-8.
※ Popup function is to inform event occurrence to the user through a warning window in the
real-time monitoring mode.
６-３-５Duration
Setup Pre-Recording( On / OFF ), Post-Recording(5 / 10 / 15 / 20 / 60 / 150 / 300 seconds). ※in Pre-
Recording, images of the last 7 seconds before the event occurrence are recorded.
６-３-６ Log
Setup On / Off for Motion / Sensor / Audio / Pattern / TEXT.
６-３-７Advanced
Setup Watermark (On/Off), QP Control.
※ QP Control is to adjust the size of the saving file by adjusting quality of the image.
QP Control has two types; CBR and VBR.
CBR : Consistent size and variable quality
VBR : Consistent quality
CBR and VBR can be set in 5 levels depending on recording quality.
６-４Schedule
SVR-1648D1 provide 4 different recording mode configurations. Each schedule mode can be set one week/24
hours and the recording follows the setting automatically.
[Figure 5-42. Pop up Alarm]
[Figure 6-43. Schedule Window]
48
Advertisement
Table of Contents
