6-７-８ Initialization; 6-７-９ Rs232C Port; 6-７-１０ Alarm; [Figure 6-61. Alarm] - Veilux VR-412D1 Operating Instructions & User Manual

※ Downgrading to a previous version is not supported.
※ The upgrade information window will then appear within 15 seconds.
⑥ Read the information and select {Yes} to start the upgrade gradually. Select {No} to return to {System}
mode.
⑦ After the update is completed, the system will be rebooted.
⑧ The system will automatically start. Upgrade is then completed.
⑨ Move to {Menu}  {Others} {Product Information}  {3. Software Version} to check the software
version.
※all setup data are a fixed value in {Menu}{Setup}{System}{6.
Upgrade}{Setup}.
6-７-８ initialization
① Move to {Menu}  {Setup}  {system}  {7. Initialization}.
② Select {Yes} when initialization (Yes/No) Window appears.
Note that all setting data will be initialized.
※ It goes back to Factory Default Value.
6-７-９ RS232C Port
① Move to {Menu}  {Setup}  {System}  {8. RS232C Port}.
② On the selection window, select the device using the arrow keys and the Select button.
6-７-１０ Alarm
Alarm is to notify occurrences such as events[Sensor, Motion and Audio] and system incidents[Video Signal
disconnected/HDD full/HDD fail/HDD warning] to [Alarm/E-mail/Relay01/System check].
① Move to {Menu}  {Setup}  {System}  {9. Alarm}.
② Select [Alarm/E-mail/Relay01/System Check]. The user can select all by ticking as shown below.
※ System Check
System Check is to pop up the System Check Window on the monitoring screen. It indicates
[Video Signal disconnected/HDD full/HDD fail/HDD warning].
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net

[Figure 6-61. Alarm]

72
Operating Instruction & User's Guide