6-２-５ Alarm Out; [Figure 6-38. Preset Action Setup Window] - Veilux VR-412D1 Operating Instructions & User Manual

after moving the focus on the top of {Post Recording} column.
6-２-５ Alarm Out
This feature is used to generate alarms through the buzzer, mail, spot monitor, Relay in case of an event.
① Buzzer
(1) Motion
The alarm goes off if the motion is detected. Select {On} / {Off}.
(2) Sensor (Only VR-412D1 supported)
The alarm goes off if the sensor is detected. Select {On} / {Off}.
(3) Sound (Only VR-412D1 supported)
The alarm goes off if the sound is detected. Select {On} / {Off}.
② PTZ Preset (Only VR-412D1 supported)
When an event occurs, the PTZ camera preset will be executed.
(1) Sensor
PTZ camera goes to the preset position if the sensor is detected. Select {On} / {Off}.
(2)Sound
PTZ camera goes to the preset position if the sound is detected. Select {On} / {Off}.
(3) Preset Action
① Select the channel at {Menu}  {Setup}  {Recording}  {Alarm Out}  {PTZ Preset}.
② Select {Preset Action}.
The user can set every channel with the same duration by pressing the Select button
after moving the focus on the top of {PTZ Preset} column.
Preset are available up to 1 ~ 8
③ E-mail
When an alarm or an event occurs, emails will be sent to the specified email address. The text of E-mail can
be shown at {Menu}  {Others}  {Log View}.

[Figure 6-38. Preset Action Setup Window]

53
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net
Operating Instruction & User's Guide