2-２-１ Basic Connection; 2-２-２ Connection Of Other Devices (Only Vr-412D1 Supported); [Figure 2-2/3. Vr-412D1 Basic Connection And Device Connection] - Veilux VR-412D1 Operating Instructions & User Manual

[Figure 2-2/3. VR-412D1 Basic Connection and Device Connection]

2-２-１ Basic Connection
By referring to above Figure 2-1, Figure 2-2/3, Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connected Device
1 CCTV camera
2 CCTV monitor
3 VGA Monitor / LCD Monitor
4 Mouse
5 CONFIG SWITCH
Refer to a further description of CONFIG SWITCH below.
1. The input video type must be either NTSC or PAL; these two types must not be used together.
2. Select the input video format (NTSC/PAL) using the config switch on the rear side of the product.
3. Select the output monitor type (VGA/TV) using the config switch on the rear side of the product.
4. CONFIG SWITCH
1) VGA Mode
Resolution of VGA Monitor is SXGA (1280*1024). However, CCTV Monitor output is not
supported.
2) TV Mode
Resolution of VGA Monitor SVGA (800 * 600). However, CCTV Monitor output is supported.
2-２-２ Connection of Other Devices (Only VR-412D1 supported)
Be cautious about difference between
Audio Channel
Sensor Channel
Relay Channel
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net
Rear Video Input
Rear TV
Rear VGA-OUT
Front USB Terminal
Rear NTSC/PAL or VGA/TV Setup
VR-412C
X
X
X
13
DVR Terminal
VR-412C & VR-412D1
VR-412D1
1
[4ea NC/NO]
[1ea NC/NO]
Operating Instruction & User's Guide
as below