Connecting Headphones; Setting Headphones Monitoring Mode - Tascam DA-6400 Owner's Manual

3 – Preparation
3. Press the MULTI JOG dial.
A second confirmation pop-up message will appear.
When
QUICK FORMAT
4. Press and hold the MULTI JOG dial to start formatting.
The following pop-up message will appear during
formatting.
When
QUICK FORMAT
5. When formatting ends, the pop-up disappears and the
Home Screen opens.
20
TASCAM DA-6400/DA-6400dp
selected
selected

Connecting headphones

Connect headphones to the PHONES jack on the front of the
unit.
CAUTION
Before connecting headphones, minimize the volume with
the PHONES knob. Failure to do so might cause sudden loud
noises, which could harm your hearing or result in other
trouble.

Setting headphones monitoring mode

The headphones monitoring mode can be set.
1. Select the
PHONES MONITOR MODE
page to open the
PREFERENCES
screen. (See "Menu operation procedures" on page
MODE
16.)
2. Set the headphones monitoring mode.
Options: (default),
STEREO
3. Confirm the setting and return to the Menu Screen.
NOTE
• When making a setting, you can press the EXIT [PEAK
CLEAR] button to cancel the changes and return to the
Menu Screen.
• When the headphones monitoring mode is set to MONO, the
solo selection frame on the Home Screen will be for a mono
channel.
• When the Home Screen or
screen is open, press and hold the MULTI JOG dial while
pressing and holding the SHIFT button to switch the
headphone monitoring mode between STEREO and MONO.
item on the
PHONES MONITOR
MONO
PHONES MONITOR MODE