Connecting Monitors And Headphones; Using The Built-In Microphone; Setting The Mics To Record A Wide Stereo Sound (A-B Position) - Tascam DR-07mk II Owner's Manual

3–Preparation
Connecting monitors and
headphones
To listen with headphones, connect them to the
/LINE OUT jack.
To listen with an external monitoring system to
the /LINE OUT jack.
Headphones Powered monitor speakers
or ampli er and speakers
46
TASCAM DR-07MKII

Using the built-in microphone

This unit's built-in microphones can be adjusted,
allowing the angles of the microphones to be
changed. You can choose Clear Stereo Sound or
Wide Stereo Sound according to the recording
source, situation, etc. by opening or closing the
microphone pair.
Setting the mics to record a wide
stereo sound (A-B position)
Spread the stereo microphone to the left and
right. (A-B position)
Set this way, the two microphones are spread
widely left and right, and recording is possible
with a strong stereo eld that is good for music,
for example.