Connecting The Dr Unit And The Smartphone By Wi-Fi (After The First Time); Remote Control Of The Dr Unit Using A Smartphone - Tascam DR-22WL Manual

5. When you turn the smartphone's Wi-Fi on, an SSID list will be
shown. Select the SSID shown on the display of the DR unit.
iOS device screen example
Android device screen example
• The screen appearance might differ depending on the
smartphone you are using. If you are unsure about where
the Wi-Fi connection menu item is, check the smartphone
operation manual.
6. When the password input screen appears on the smart-
phone, input the password shown on the DR unit.
7. A Wi-Fi connection will be established between the unit
and the smartphone and the Wi-Fi indicator on the unit will
light.
4
TASCAM DR CONTROL
DR CONTROL
Connecting the DR unit and the
smartphone by Wi-Fi (after the first
time)
After a DR unit and a smartphone have been connected once,
they can be connected again by just selecting the SSID.
1. Press the Wi-Fi button on the DR unit. The Wi-Fi indicator
will start to blink.
A "NEW CONNECTION?" pop-up message appears on the
display to confirm whether or not this is a new connection.
2. Since this smartphone has been connected previously, press
the F2 button on a DR-22WL or the 8/HOME button on a
DR-44WL.
DR-22WL
3. The pop-up message on the display disappears and the unit
is ready to connect with the smartphone.
4. On the smartphone, select "Settings" and then "Wi-Fi".
5. When you turn the smartphone's Wi-Fi on, an SSID list will be
shown. Select the SSID shown on the display of the DR unit.
6. A Wi-Fi connection will be established between the DR unit
and the smartphone and the Wi-Fi indicator on the unit will
light.
Remote control of the DR unit using a
smartphone
The screens shown in the TASCAM DR CONTROL app are similar
to those shown on the DR unit and remote operation is possible
in almost the same manner.
Check the operation of the DR unit itself before using the
TASCAM DR CONTROL app to make operation as smooth as
possible.
1. After a Wi-Fi connection has been established between the
unit and the smartphone, launch the TASCAM DR CONTROL
app that you installed earlier.
The following explains the Home Screen of the DR-22WL when it
is connected by Wi-Fi.
See "DR-44WL TASCAM DR CONTROL Home Screen" on page
7 when using a DR-44WL connected by Wi-Fi.
The contents of the screen are all synchronized with the unit.
When a remote operation is conducted, the Wi-Fi indicator on
the unit will turn off and become lit, allowing you to confirm
that it has received a remote operation command.
DR-44WL