Setting The Recording File Format - Tascam DA-6400 Owner's Manual

Options:
– : First channel included when selecting a
CH01 CH63
range of channels at once
– : Last channel included when selecting a
CH02 CH64
range of channels at once
/ : Record function status for range of channels
OFF ON
selected at once
4. By moving the cursor to the record function display area,
you can enable/disable recording for individual channels.
Press the MULTI JOG dial to enable/disable recording for the
channel where the cursor is.
NOTE
You can also turn the MULTI JOG dial to select a channel.
Turn the MULTI JOG dial while pressing and holding the
SHIFT button to move the cursor by 4 channels at a time.

Setting the recording file format

The quantization bit depth and sampling frequency used when
recording files can be set.
1. Select the
BIT LENGTH
page to open the
FORMAT
"Menu operation procedures" on page 16.)
2. Set the quantization bit depth.
Options: ,
16bit 24bit
3. Confirm the setting and return to the
page.
FORMAT
4. Turn the MULTI JOG dial to select the
5. Press the MULTI JOG dial to open the
6. Set the sampling frequency used for recording.
Options: ,
44.1kHz 48kHz
7. Confirm the setting selection to change the sampling
frequency used by the unit and return to the Menu Screen.
item on the
REC FILE
screen. (See
BIT LENGTH
(default)
REC FILE
item.
REC Fs
screen.
REC Fs
(default), ,
88.2kHz 96kHz
When the setting is changed from 44.1/48kHz to 88.2/96kHz or
from 88.2/96kHz to 44.1/48kHz, a message appears confirming
that the maximum number of recording channels has changed,
as shown below.
When this message is open. press the MULTI JOG dial to confirm
the sampling frequency change and return to the Menu Screen.
NOTE
The maximum number of recording channels for this unit is
as follows.
o 44.1/48kHz recording sampling frequency: 64 channels
o 88.2/96kHz recording sampling frequency: 32 channels
TASCAM DA-6400/DA-6400dp
4 – Recording
25