Table of Contents
Advertisement
7 – Internal Settings
Setting the SNTP function
Use the SNTP page to make settings for automatically synchro-
nizing with the date and time of an Internet time server.
SNTP STATUS
8
This shows the current status of the SNTP function.
Message
Status
The unit will be synchronized with
Sync at YYYY/MM/DD
the NTP server at the date and time
hh:mm
shown.
Starting Up
The unit is preparing for operation.
The unit is connecting with a
Accessing Server
server.
Disabled
The SNTP function is disabled.
The unit is waiting to confirm the
Waiting for Network
network connection.
The server name could not be
Server Name not found
found on the DNS server.
The server name was found on the
Server Name found
DNS server.
Server connection failed
The server has not responded.
Server responded, but is refusing
Server refusing connec-
additional connections; select a
tions
different SNTP server
SNTP UPDATE
8
This shows the setting status of the
screen.
UPDATE
Select the
item, and press the MULTI JOG dial
SNTP UPDATE
to open the
SNTP UPDATE
item
MODE
Set the SNTP function update mode.
Options
(default): Do not use SNTP function.
Disable
: When the unit starts up, get the time
Start Up
from an NTP server and use it to set the built-in clock.
Start Up/24h cycle
NTP server and use it to set the built-in clock when the
unit starts up, as well as when the time set with the
item occurs every 24 hours.
UPDATE TIME
NOTE
When using the SNTP function, you must set the NTP Server
item and the
page
NETWORK
40
TASCAM DA-6400/DA-6400dp
item on the
MODE
SNTP
screen.
: Get the time from an
item.
DNS SETUP
NTP SERVER
8
This shows the setting status of the
item, and press the MULTI JOG dial
Select the
NTP SERVER
to open the
screen.
NTP SERVER
Edit the NTP server name, which must have no more
than 32 characters (default: ntp.nict.jp).
For details about how to edit the text, see "Editing text"
on page 26.
NOTE
Press the MULTI JOG dial on PRESET5 to open a pull up
menu.
Turn the MULTI JOG dial to select a menu item, and press
the MULTI JOG dial to input the preset value of that item.
Press the EXIT [PEAK CLEAR] button to close the pull-up
menu.
UPDATE TIME
8
This shows the setting status of the Time item on the
screen.
TIME
item, and press the MULTI JOG dial
Select the
UPDATE TIME
to open the
UPDATE TIME
item
Time
If the
item on the
MODE
to
Start Up/24h cycle
time will be acquired from the NTP server.
Options:
00:00-00:09
1-hour steps, default: "00:00-00:09")
NOTE
Since access to SNTP servers on the hour could result in
congestion, the unit will access the SNTP server randomly
during the first 10 minutes of the hour.
screen.
NTP SERVER
UPDATE
screen.
screen is set
SNTP UPDATE
, set the time when the
–
(in
23:00-23:09
Advertisement
Table of Contents
