Table of Contents
Advertisement
Mark functions
Adding marks
Marks can be added in the following ways.
Including the marks added by the automatic mark function, one
take can have up to 99 marks added to it.
Adding marks manually
8
Press the MULTI JOG dial to add a mark at the current playback/
recording point.
The mark will be named "MARK xx".
Adding marks automatically
8
The automatic mark function allows the unit to add marks
automatically during recording. For details about the automatic
mark function, see "Adding marks automatically when recording"
on page 27.
The marks will be named according to type.
Reason mark added automatically Mark name
Overload indicator lit
Synchronization with master clock
lost
At set time interval
Using marks
Press the INFO button while pressing and holding the SHIFT
button to open the
MARK INFO
is shown when the current take has no
No Mark Point
marks.
Select the desired mark on the
the MULTI JOG dial to open the mark pop-up menu.
Turn the MULTI JOG dial to select the desired item, and press
the MULTI JOG dial to execute it as follows.
LOCATE
8
Move to the selected mark. (See "Moving to marks" on page
45.)
8 – Mark and Locate Functions
OVERxx
UNLKxx
TIMExx
page.
Screen and press
MARK INFO
EDIT TIME
8
Open the
EDIT MARK TIME
selected mark.
EDIT NAME
8
Open the
screen where you can edit the
MARK NAME
selected mark.
DELETE
8
Delete the selected mark. (See "Deleting marks" on page 46.)
DELETE ALL
8
Delete all marks in the current take. (See "Deleting all marks in
the current take" on page 46.)
SORT BY TIME
8
Show marks sorted by time.
SORT BY NAME
8
Show marks sorted by name.
INFO
8
Open a pop-up with the number of marks of each type in the
current take. (See "Viewing mark information" on page 46.)
CANCEL
8
Close the mark menu.
Moving to marks
Using buttons to move to marks
8
Press the . [MARK .] or / [MARK /] button while
pressing and holding the SHIFT button to move to the previous
or next mark.
NOTE
If the settings of the
INPUT AUX1
are MARK SKIP +, MARK SKIP -, TAKE/MARK SKIP +, TAKE/
MARK SKIP - or MARK on the
if a mark movement event is input through the PARALLEL
connector, the transport will move one mark backward
or forward for each event.(See "PARALLEL INPUT page
settings" on page 38.)
Using the menu to move to marks
8
1. Turn the MULTI JOG dial to select the mark to which you
want to move.
2. Press
the MULTI JOG dial to open the mark pop-up menu,
select the
item and press the MULTI JOG dial to
LOCATE
move to the selected mark.
TASCAM DA-6400/DA-6400dp
screen where you can edit the
name of
–
items
INPUT AUX6
screen,
PARALLEL INPUT
45
Advertisement
Table of Contents
