Tc Setup - Tascam DA-6400 Owner's Manual

TC SETUP 2 page settings
TC GENERATOR MODE
8
This shows the timecode generator mode.
Select the
TC GENERATOR MODE
MULTI JOG dial to open the
TC GENERATOR MODE
item
GENERATOR MODE
This sets the internal timecode generator mode.
Option Meaning
The timecode generator runs by itself
FREE RUN
(default) from the START TIME.
After capturing the input timecode
once, the generator runs by itself from
FREE ONCE
the captured timecode in free run mode.
After capturing the time from the
built-in clock when one of the following
operations is conducted, the generator
runs by itself in free run mode.
TIME OF
DAY
i Turning the unit on
i Changing the mode to TC GEN MODE
i Resetting the built-in clock
The generator synchronizes to timecode
when it is being input. If timecode input
JAM SYNC
stops, the generator runs by itself in free
run mode.
The generator synchronizes to the input
REGEN
timecode.
The timecode generator runs only
during recording. The timecode
REC RUN
generator stops when not recording.
Recording starts when the unit synchro-
nizes with external TC, and recording
pauses when synchronization with the
external TC is lost.
When set to
the TC indicator on the Home Screen
TC SYNC
lights/blinks red. For details, see the TC
REC
indicator explanation in 8 Timecode
status on "Home Screen" on page 12.
NOTE
Set this unit and the TC to use the
same frame types.
item, and press the
screen.
mode,
TC SYNC REC
7 – Internal Settings
TC FRAME TYPE
8
This shows the timecode frame type.
Select the
TC FRAME TYPE
dial to open the
TC FRAME TYPE
item
FRAME TYPE
This sets the timecode frame type.
Options: ,
23.976F 24F
,
30DF 30NDF
TC OUTPUT MODE
8
This shows the timecode output mode.
Select the
TC OUTPUT MODE
JOG dial to open the
TC OUTPUT MODE
item
OUTPUT MODE
This sets the timecode output mode.
Option
Generator Out
(default)
Play Out
TASCAM DA-6400/DA-6400dp
item, and press the MULTI JOG
screen.
, , (default),
25F 29.97DF
item, and press the MULTI
screen.
Meaning
Output the timecode of the
built-in timecode generator.
This outputs the timecode
contained in the file.
37