Setting The Built-In Clock Date And Time; Adjusting The Brightness; Preparing Ssd/Hdd Drives And Usb Flash Drives For Use - Tascam DA-6400 Owner's Manual

Setting the built-in clock date and
time
Using its internal clock, this unit includes the date and time
when a file is recorded.
1. Select the
CLOCK ADJUST
page to open the
SETUP
"Menu operation procedures" on page 16.)
2. Press the MULTI JOG dial to enter setting mode and show
the cursor on the item to be changed.
Use the .// [MARK .//] buttons to move the
cursor.
3. Turn the MULTI JOG dial to change a value, and press the
MULTI JOG dial to confirm it and move the cursor to the
next item.
4. The cursor will disappear and setting the time of the built-in
clock will complete after you change the year, month, day,
hour and minute in order.
NOTE
When making a setting, you can press the EXIT [PEAK
CLEAR] button to cancel the changes and return to the
Menu Screen.
5. Press the EXIT [PEAK CLEAR] button to return to the Menu
Screen.

Adjusting the brightness

While pressing and holding the HOME [METER] button, turn the
MULTI JOG dial to adjust the brightness of the color display and
the indicators.
While pressing and holding the HOME [METER] button, press
and turn the MULTI JOG dial to adjust the brightness of only the
color display.
item on the
SYSTEM
screen. (See
CLOCK ADJUST
3 – Preparation
Preparing SSD/HDD drives and USB
flash drives for use
In order to use an SSD/HDD drive or USB flash drive with this
unit, you must use this unit to format it first.
CAUTION
• Formatting erases all the data on the SSD/HDD drive or USB
flash drive. Confirm that this is okay before proceeding.
• Always use this unit to format
Operation of this unit might be affected when using an
SSD/HDD or USB flash drive that has been formatted by a
computer or other device.
1. On the page, select the
MEDIA
item. (See "Menu operation procedures"
FULL FORMAT
on page 16.)
: Format only media management
QUICK FORMAT
data.
: Completely format the media.
FULL FORMAT
2. When the
QUICK FORMAT
opens, select the media to format.
When
QUICK FORMAT
The following pop-up message will appear.
When
QUICK FORMAT
NOTE
• Press the EXIT [PEAK CLEAR] button to cancel formatting.
• If no SSD/HDD drive is loaded, the following pop-up
message will appear.
TASCAM DA-6400/DA-6400dp
medias to be used with it.
or
QUICK FORMAT
or screen
FULL FORMAT
selected
selected
19