Selecting file format ..............25 Conducting overwrite recording ...........44 Simultaneous listening to playback and input sound Checking the result of recording ...........44 (MONITOR MIX) ................25 Undoing and redoing ..............44 Adjusting the input level ............26 Ending overwrite recording mode ........44 TASCAM DR-05X...
Page 3
Setting the WORD item .............55 13 – Messages ..............56 14 – Troubleshooting ............58 15 – Specifications ............. 59 General ....................59 Input/output ratings ...............59 Analog audio input/output ratings ........59 Control input/output ratings ..........59 Audio performance .................59 Other specifications .................59 TASCAM DR-05X...
High-performance stereo unidirectional microphone pair i Micro-B type USB 2.0 port i Operates on 2 AA batteries, a TASCAM PS-P520E AC adapter i 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format) (sold separately) or USB bus power...
A list of microSD cards that have been confirmed for use with this unit can be found on the TEAC Global Site (http:// teac-global.com). Check the page for this product. You can also contact TASCAM customer support service. Precautions for use microSD cards are delicate media.
INPUT is ON on the MONITOR MIX screen, a pop-up menu to set whether overdubbing is ON/OFF will open. When in standby, press to start recording. The REC indicator will light when recording. When recording, press to pause recording. TASCAM DR-05X...
M IC/EXT IN jack Use this input jack to connect a stereo mini-jack micro- phone or an external input device. This supports plug-in power. The built-in mic is disabled when an external mic is connected to the MIC/EXT IN jack. TASCAM DR-05X...
Use this slot to insert and remove microSD cards. f Battery compartment cover g Battery compartment Install batteries (2 AA) in this compartment to power the unit. (See "Using AA batteries" on page 14) TASCAM DR-05X...
The batteries are almost dead and the power will soon : All files added to the playlist turn off (standby) if the icon with no bars appears. When using a TASCAM PS-P520E AC adapter (sold r P layback file number/total number of files separately) or USB bus power, appears.
When overdubbing, the levels of the mixed input and playback sounds are shown. 7 Recording file name The file name that will automatically be given to the recorded file is shown. 8 R ecording format This shows the file recording format and sampling frequency. TASCAM DR-05X...
40 LEVEL ALIGN Work with files and folders on the SD card see page 32 BROWSE Select the SD card reader mode see page 49 SD CARD READER Make USB audio interface settings see page 50 AUDIO I/F TASCAM DR-05X...
Page 12
EFFECT screen: all items i When the Playback Control screen is open, pressing the MENU button will not open the MENU screen. This turns the loop playback function on/off. (See "Loop playback of a selection" on page 38) TASCAM DR-05X...
Repeat step 3 to 6 as necessary to set other items. Press the MENU button to open the MENU (or OTHERS) screen. To return to the Home Screen, press the ¤ (HOME) [8] button. TASCAM DR-05X...
Preparing the power supply As shown in the illustration, connect a TASCAM PS-P520E AC This unit can operate on two AA batteries, using a TASCAM adapter (sold separately) to the unit's USB port and charge PS-P520E AC adapter (sold separately) or using a commercial- the unit.
When the unit is off (in standby), press and hold the ¤ RECORDER appears on the display. (HOME) [8] button until the TASCAM DR-05X start-up screen The unit turns off (puts it in standby) after it completes its is shown on the display.
Setting the date and time (highlighted area), and use the + or − button to change values. The DR-05X uses its internal clock to record the date and time Press the 7 button to confirm the change and return to to the recorded files.
Do not remove the microSD card from the unit when it is connected to a computer by USB. i The DR-05X is compatible with microSD/microSDHC/ microSDXC standards. i A list of microSD cards that have been confirmed for use with this unit can be found on the TEAC Global Site (http:// teac-global.com).
7 button. The SPEAKER screen will open. Options: OFF (default), ON Use the + or − button to select (highlight) a setting, and press the 7 button to enable it and return to the Home Screen. TASCAM DR-05X...
(in parentheses). i If the recording time exceeds 24 hours, the unit will automatically continue recording in a new file. After completing the setting, press the ¤ (HOME) [8] button to return to the Home Screen. TASCAM DR-05X...
The low cut filter can reduce noise such as unpleasant wind noise from air-conditioners and projectors. i Use the built-in effects of this unit as necessary on the input source. (See "Setting the effect" on page 47) TASCAM DR-05X...
Press the QUICK button to open the quick menu. NOTE The setting of left-right channels is disabled if an external mic is connected to the MIC/EXT IN jack. TASCAM DR-05X...
Page 23
If you need to monitor sound to adjust the input level and make recordings, connect the headphone to the /LINE OUT jack. Use the + or − button on the Home Screen to adjust the monitoring volume. This does not affect the sound to be recorded. TASCAM DR-05X...
Use the + or − button to select (highlight) a mode, and press the 7 button to enable the mode and return to the recording screen. The selected mode is shown with an icon in the recording screen. MANUAL Manually adjusting the input level TASCAM DR-05X...
Use the + or – button to select (highlight) the FORMAT menu item, and press the / or 7 button. Set the file format with the + or – button. After completing the setting, press the ¤ (HOME) [8] button to return to the Home Screen. TASCAM DR-05X...
Use the + or – button to select (highlight) the PB INPUT the set level. menu item, and press the / or 7 button. Use the + or – button to adjust the playback volume level. This can be set from 0 - 20. TASCAM DR-05X...
-24dB or -48dB. After completing the setting, press the ¤ (HOME) [8] button to return to the Home Screen. Press the RECORD [0] button to begin recording standby. Recording starts automatically when the input signal exceeds the LEVEL setting. TASCAM DR-05X...
If the name of a newly created file would be the same as that of an existing file, the number will be incremented until the new file has a unique name. i Track incrementing is not possible during overdub or overwrite recording. TASCAM DR-05X...
Capturing a few seconds before starting Self-timer recording (PRE REC) Similar to a camera, the DR-05X has a self-timer function to begin recording after a set period of time. By using prerecording, when the unit is in recording standby you can record up to two seconds of the signal input before Press the RECORD [0] button when stopped or playing the RECORD [0] button is pushed to start recording.
Home Screen. CAUTION i When recording is stopped by the AUTO REC function, no tone signal will be recorded when it stops. i During overwrite recording, the automatic tone function cannot be used. TASCAM DR-05X...
If the recording time exceeds 24 hours, the unit will automatically continue recording in a new file. i If recorded in mono in WAV files, the maximum recording time will be double the figures above. TASCAM DR-05X...
Information (date/time, size) about the selected file appears. If the playback area has been set to FOLDER, this folder becomes the new playback area. Press the . button to return to the BROWSE screen. TASCAM DR-05X...
When recording, files are created in this folder. ALL DELETE A pop-up message appears to confirm that you want to delete all the files in the selected folder at once. To delete the file, press the / button. To cancel deletion, press the . button. TASCAM DR-05X...
Use the + or – button to select (highlight) the PLAY Playback area indication SETTING menu item, and press the 7 button. This opens the PLAY SETTING screen. Use the + or – button to select (highlight) the AREA item, and press the / or 7 button. TASCAM DR-05X...
This folder becomes the current folder, and new In addition, the folder that contains this file becomes the recorded files will be saved in this folder. playback area regardless of the playback area folder set previously. TASCAM DR-05X...
The BROWSE screen will open. Use the . button to move to the top folder level. Use the + or − button to select PLAYLIST, and press the / button. This opens the PLAYLIST screen. TASCAM DR-05X...
When the Home Screen is open and a file is playing back or stopped, press and hold the . or / button to search the playback file backward or forward. NOTE Press and hold the . or / button to accelerate the search speed. TASCAM DR-05X...
PB CONT button to open the Playback Control screen. Press the 7 button to start playback, and press the MARK button at the start point of the section that you want to play repeatedly. This position is set as the IN (start) point. TASCAM DR-05X...
Options: OFF (default), TREBLE +, TREBLE -, MIDDLE +, MIDDLE -, BASS +, BASS - Use the + or − button to select (highlight) a setting, and press the 7 button to enable it and return to the Home Screen. TASCAM DR-05X...
Select (highlight) OFF and press the 7 button to disable the level alignment function. NOTE The level alignment function might not have much effect depending on the source of the sound (for example, a music file that has already had sound pressure adjusted). TASCAM DR-05X...
Use the + or − button to select (highlight) a setting, and press the 7 button to enable it and return to the Home Screen. Setting the jump forward time Operation from the MENU screen Press the MENU button to open the MENU screen. TASCAM DR-05X...
48 TUNER Move to where overwrite recording started. see page 44 TO EDIT POINT Restore to state before most recent overwrite OVERWRITE MODE see page 44 UNDO recording. Exit OVERWRITE mode. see page 44 MODE EXIT TASCAM DR-05X...
While the Home Screen is open when stopped, press the marks manually" on page 46) QUICK button to open the Quick menu. Use the + or − button to select DIVIDE, and press the 7 button. The DIVIDE screen will open. TASCAM DR-05X...
When the Home Screen is open and the unit is stopped, use the Quick menu to select MODE EXIT, and press the 7 button. This ends overwrite recording mode. CAUTION Ending overwrite recording mode will delete any file available for UNDO (REDO) operations. TASCAM DR-05X...
LEVEL ALIGN: The overall sound pressure is increased to enhance listenability. Changing the playback position Press . briefly: jump back Press / briefly: jump forward You can set the jump back and jump forward times from the Quick menu when stopped. TASCAM DR-05X...
You can use this function to go to the beginning of a song, similar to an index. NOTE You cannot move to a cue mark of a different file. Clearing marks When stopped or paused, move to a mark. Then, press the MARK button to clear that mark. TASCAM DR-05X...
Use this to change the output level of the preset effect selected in the PRESET item. Setting range: 0 - 20 (Default: 10) SOURCE: Use this to set whether the effect is applied to the input signal (INPUT) or the output signal (MONITOR). (Default: MONITOR) TASCAM DR-05X...
Adjustment is the same as explained in "Adjusting the Setting range: 435Hz - 445Hz input level" on page 26. (in 1 Hz increments, default: 440Hz) NOTE When the TUNER screen is open, press the 7 button to reverse the screen orientation. TASCAM DR-05X...
NOTE The same thing will also happen when using an AC adapter. Use the + or − button to select (highlight) the SD CARD READER item and press the 7 button. The SD CARD READER screen will open. TASCAM DR-05X...
This unit cannot recognize subfolders and audio files on the third level or below. i Since you can set the DR-05X to only play the contents of a specific folder, you can organize files into genres, artists or other categories as you like.
With Windows, an ASIO driver for the DR-X series can be i EFFECT: Open the effect settings screen. used. Check the page for this product on the TASCAM website (https://tascam.com/us/) for details. i DISCONNECT: End the USB audio interface mode connection.
Shows the automatic backlight OFF setting. Shows the file name. If an MP3 file has ID3 tag title information that information BATTERY TYPE appears. Shows the battery type setting. DATE VERSION Date of file creation Shows the system firmware version. SIZE File size TASCAM DR-05X...
Use the BATTERY TYPE item to set the battery type. This setting is used to display the remaining battery power and to calculate the minimum capacity for normal operation. Options: ALKAL (alkaline batteries, default), Ni-MH (nickel- metal hydride batteries) TASCAM DR-05X...
Press the / button to start formatting the microSD card. i FULL FORMAT checks the memory for errors while Press the . button to cancel formatting the microSD formatting, so it takes more time than QUICK FORMAT. card. TASCAM DR-05X...
+ or − button to select the character. In addition to the alphabet and numbers, the following characters can be used. ! # $ % & ‘ ( ) + , - . ; = @ [ ] ^ _ ` { } ~ TASCAM DR-05X...
13 – Messages The following is a list of pop-up messages. Refer to this list if one of these pop-up messages appears on the DR-05X and you want to check the meaning or determine a proper response. Message Details and responses The DIVIDE function would cause the file name to exceed 197 characters.
Page 57
System Err 50 If the power cannot be turned off, remove the batteries, disconnect the AC adapter (TASCAM PS-P520E), and/or disconnect the USB cable if using USB bus power. System Err 1 If these error messages continue to appear frequently, please contact the store System Err 2 where you purchased this unit or TASCAM customer support service.
If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not resolve the issue, please contact the retailer where you purchased this unit or a TASCAM customer support service.
2 AA batteries (alkaline or NiMH) Maximum input level: −4 dBV USB bus power from a computer /LINE OUT jack AC adapter (TASCAM PS-P520E, sold separately) Connector: 1/8" (3.5mm) stereo mini jack Power consumption Output impedance: 12 Ω 1.7 W (maximum) Reference output level: sec14 dBV (with 10 kΩ...
Page 60
About 13.5 hours Using headphones Playback MP3 48kHz, 320Kbps About 13 hours Using built-in speaker Recording: JEITA recording time Playback: JEITA music playback time NOTE The battery operation times (during continuous operation) could vary depending on the media being used. TASCAM DR-05X...
Page 61
165 g (5.82 oz) (including batteries) Operating temperature 0°C–40°C (32°F–104°F) Dimensional drawings 61mm 26mm i Illustrations in this manual might differ in part from the actual product. i Specifications and external appearance might be changed without notification to improve the product. TASCAM DR-05X...
Page 62
TEAC CORPORATION Phone: +81-42-356-9143 https://tascam.jp/jp/ 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 https://tascam.com/us/ 10410 Pioneer Blvd. Suite #1 and #4, Santa Fe Springs, California 90670, U.S.A. TEAC UK Ltd. Phone: +44-1923-797205 https://tascam.eu/ Meridien House, 69-71 Clarendon Road, Watford, Herts, WD17 1DS, United Kingdom...
Need help?
Do you have a question about the DR-05X and is the answer not in the manual?
Questions and answers